Setting the Remote for Time Delay Exposures (Wired and Wireless):
1. Setting your camera
a) Connect the remote to the camera and turn it ON.
b) Adjust the camera setting.
Exposure Mode
M (manual)
Shutter Speed
BULB
Interval Timer
OFF
Focus Mode
Auto Focus or Manual
Continuous
S (single frame)
2.
Setting the transmitter
a. Press the SET button (7). The SET icon on the Control Panel (17) will flash.
b. Adjust the following settings:
Option
Description
Supported Setting
DE
Just like the self-timer on your camera, the timer remote
switch allows you to set any delay (in 1 second increments)
up to 99 hours, 99 minutes and 99 seconds.
0s to 99hrs 59min 59s
BU
It allows you to take time exposures up to 100 hours in
length.
0s to 99hrs 59min 59s
INT
The Interval Timer can be set to any time period up to 100
hours as well. If you set it to 10 minutes, for example, one
exposure will be taken every 10 minutes until either the film
runs out or the Exposure Count limit has been reached.
1s to 99hrs 59min 59s
N
This setting permits you to set the number of exposures that
will be taken, up to 999 shots.
1 to 999 or
--
(unlimited)
Speaker ON/OFF
ON/OFF
Delay(
DE
), Exposure/BULB(
BU
) and Interval Settings (
INT
)
IMPORTANT:
Please ensure the interval time is longer than exposure time by at least 2 seconds.
Содержание Timer Remote 4964
Страница 5: ...Install or replace the batteries Transmitter ...
Страница 6: ...Receiver ...
Страница 8: ...Wireless Operation ...
