12
operation.
TROUBLESHOOTING
PROBLEM POSSIBLE
CAUSE
POSSIBLE
SOLUTION
Until will
not start
• Cord
not
plugged
in.
• Plug tool into a
working outlet.
• Circuit
fuse is
blown.
• Replace circuit fuse.
(If the product
repeatedly causes the
circuit fuse to blow,
discontinue use
immediately and have it
serviced at a
PROMAKER
®
service
center or authorized
servicer.)
• Circuit
break-
er is
tripped.
• Reset circuit breaker.
(If the product repeated-
ly causes the circuit
breaker to trip,
discontinue use
immediately and have it
serviced at a
PROMAKER
®
service
center or authorized
servicer.)
• Cord
or
switch is
dam-
aged.
• Have cord or switch
replaced at
PROMAKER
®
Service
Center or
Authorized Servicer
MAINTENANCE
Use only mild soap and damp cloth
to clean the tool. Never let any liquid
get inside the tool; never immerse
any part of the tool into a liquid.
IMPORTANT:
To assure product
SAFETY and RELIABILITY, repairs,
maintenance and adjustment (other
than those listed in this manual)
should be performed by authorized
service centers or other qualified
service personnel, always using
identical replacement parts.
ACCESSORIES
WARNING:
Since accessories,
other than those offered by
PROMAKER
®
, have not been
tested with this product, use of such
accessories with this tool could be
hazardous. To reduce the risk of
injury, only PROMAKER
®
recommended accessories should
be used with this product. A
complete line of accessories is
available from your PROMAKER
®
Service Center or a PROMAKER
®
Authorized Warranty Service
Center. Please visit our Web Site
www.promakertools.com for a
catalog or for the name of your
nearest supplier.
