5
not recommended.
See
Sanding
Lead Based Paint
for additional
information before sanding paint.
• Clean your tool out periodically.
WARNING: Some dust created
by power sanding, sawing,
grinding, drilling, and other
construction activities contains
chemicals known to the State of
California to cause cancer, birth
defects or other reproductive
harm. Some examples of these
chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks
and cement and other masonry
products, and
• arsenic and chromium from
chemically-treated lumber.
Your risk from these exposures
varies, depending on how often you
do this type of work. To reduce your
exposure to these chemicals: work
in a well ventilated area, and work
with approved safety equipment,
such as those dust masks that
are specially designed to filter out
microscopic particles.
• Avoid prolonged contact
with dust from power sanding,
sawing, grinding, drilling, and
other construction activities.
Wear protective clothing and
wash exposed areas with soap
and water.
Allowing dust to get into
your mouth, eyes, or lay on the skin
may promote absorption of harmful
chemicals.
SYMBOLS
The label on your tool may include
the following symbols. The symbols
and their definitions are as follows:
V
Volts
A
Amperes
Hz
Hertz
W
Watts
min
minutes
or AC alternating current
or DC direct current
no
no load speed
Class I Construction
(grounded)
Earthing terminal
Class II Construction
(double insulated)
Safety alert symbol
/Min or
rpm
Revolutions or
reciprocation per
minute
Read instruction
manual before use
Use proper
respiratory protection
Use proper eye
protection
Use proper hearing
protection
