Promag TR510E Скачать руководство пользователя страница 39

Страница: 39 / 62

TR510E User’s Manual

The TR510E features a relay that can be used for external bell control. Up

to 7x32 different bell times can be specified for one week to activate the bell.

These 7x32 bell times are programmed into 7 tables from Sunday to Saturday,

group-2 registers 00H-1FH program for Sunday table, group-2 registers 20H-

3FH program for Monday table, group-2 registers 40H-5FH program for

Tuesday table, group-2 registers 60H-7FH program for Wednesday table,

group-2 registers 80H-9FH program for Thursday table, group-2 registers A0H-

BFH program for Friday table, and group-2 registers C0H-DFH program for

Saturday table. Each table has 32 bell table entries, each

bell table entry

consists of 2 fields: ‘time’ field (set through these group-2 registers 00H-DFH)

and a corresponding ‘enable/disable’ field (set through group-3 registers 00H-

DFH).

Bell table (Week mode), enable/disable (group-3 registers 00H-DFH)

Set

Possible error codes:04, 07

Command

RR,SS

Get

Possible error codes: 04, 07

Command

KRR

SScc

- register number (group 3) in the Hex form (00H-DFH),

- state (00:

disabled, 01: enabled),

- checksum

The TR510E features a relay that can be used for external bell control. Up

to 7x32 different bell times can be specified for one week to activate the bell.

These 7x32 bell times are programmed into 7 tables from Sunday to Saturday,

group-3 registers 00H-1FH program for Sunday table, group-3 registers 20H-

3FH program for Monday table, group-3 registers 40H-5FH program for

Tuesday table, group-3 registers 60H-7FH program for Wednesday table,

group-3 registers 80H-9FH program for Thursday table, group-3 registers A0H-

BFH program for Friday table, group-3 registers C0H-DFH program for Saturday

table. Each table has 32 bell table entries, each

bell table entry

consists of 2

fields: ‘time’ field (set through group-2 registers 00H-DFH) and a corresponding

Содержание TR510E































































Результаты поиска

Содержание TR510E

Отзывы:

Promag TR510E, Руководство пользователя, Страница: 39 / 62

Результаты поиска

Содержание TR510E

Отзывы: