Promag TR510E, Руководство пользователя, Страница: 10 / 62

TR510E User’s Manual
10
table)
‘J’ 4AH Set group-3 registers (see group-3
table)
+ +
‘K’ 4BH Get group-3 registers (see group-3
table)
+ + +
‘N’ 4EH Get number of records
+ +
‘G’ 47H Get specified record
+ + + +
‘W
’
57H Get total capacity of database (in
records)
+
‘E’ 45H Initialize the database +
‘M’ 4DH Prepare for database recovery +
‘L’ 4CH Enable/Disable real-time data
transmission function
+ +
‘O’ 4FH Get real-time data transmission
function status
+
‘Z’ 5AH Perform self-test** Note 2
Note 1. D-command never returns error message even if the data supplied in the
command packet is incorrect. Invalid command packet makes it impossible to determine
which terminal is being addressed and, therefore, which one should reply with an error code.
Note 2.
Self-test takes place on the next power-up, not immediately.
Terminal will deny this command when all data have not sent out completely yet
in real-time data transference mode .
The TR510E have 3 group registers. Group-1 is for accessing registers for
“LED mode”, “bell duration”, “32 entries of bell table times field (Everyday
mode)”, “32 entries of bell table enable/disable field (Everyday mode)”, “event
lock mode”, “Relay function”, “event table times field (32 entries)”, “event table
enable/disable field (32 entries)”, and “bell table mode (Everyday or Week)”,
“Daylight Saving Time”, “Enable/Disable Daylight Saving Time function”, “Door
lock duration”, “Prefix to match”, “From Character”, “Number of characters”.
Group-2 is for accessing registers of “7x32 entries for bell table times field
(Week mode, from Sunday to Saturday)”. Group-3 is for accessing registers of
“7x32 entries of bell table enable/disable field (Week mode, from Sunday to
Saturday)”.