TR510E User’s Manual
17
Get group-3 registers (‘K’, 4BH)
Possible error codes: 04, 07
Command
K
RR
Reply
A
reg_datacc
RR- register number (group 3) in Hex form (00H…FFH),
reg_data
is the
data stored in the register,
cc
- checksum
This command is used to retrieve the data contained in the designated
“group-3 registers”. Registers are actually functioning parameters (settings) with
respect to access bell table ‘enable/disable’ field (7x32 entries) from Sunday to
Saturday. Complete description of all available registers can be found in Section
4.
Get number of records (‘N’, 4EH)
Possible error codes: 07
Command
N
Reply
A
NNNNcc
NNNN
- number of records in Hex form;
cc
- checksum
This command can be used to retrieve the number of records currently
found in the database. Leading zeroes are not omitted, so reply string length is
always the same.
Get specified record (‘G’, 47H)
Possible error codes: 04, 06, 07
Command
G
NNNN
Reply
A
NNNN,ccc…c,E,YYYY/MM/DD,hh:mm:sscc
NNNN
- record number (starting from 0000) in Hex form,
ccc…c
- ID-code,
E
-
event (0: OUT, 1: IN),
YYYY
- year,
MM
-month,
DD
-date,
hh
-hour,
mm
- minute,
ss
- second,
cc
- checksum
Содержание TR510E
