Promac SY-350-ALU, Инструкция по эксплуатации и каталог запасных частей

Страница: 9 / 24

9
Operations
Cutting operation
1. Connect the pressure-air supply on
the plug C (Fig 5).
2. Clamp the material to be cut firmly to
the working base by turn on the
switch D (Fig 6) keeping it pressed
against the fence so that it cannot
move during the cutting operation.
3. Push green button of main switch E
(Fig 7).
4. Use the handle F (Fig 7) to lower the
blade until it comes into contact with
the material to be cut, then push
grad gradually until you have
completed the desired cut.
1. Pushing down harder on the
handgrip does not necessarily mean
that you will cut faster; in fact this
can lead to the motor overloading,
resulting in less efficient operation.
2. When you have completed the cut,
turn off the motor by releasing the
button and guide the saw/motor arm
back to its idle position.
D
Fig 6
C
Fig 5
E
Fig 7
F