Promac SY-350-ALU, Инструкция по эксплуатации и каталог запасных частей

Страница: 10 / 24

10
Setting and Adjustment
Adjustment of the table angle
The turntable can be turned right or left.
It is semi automatically blocked at 15
degree, 22-1/2 degree, 30 degree, 45
degree and in center position at 90
degree.
In order to turn the table to these
positions, first release knob H (Fig 8) if it
is tightened. Pull up lever G (Fig 8) and
turn the saw-motor arm. When the fixed
pointer located on the base is indicating
the required setting of the scale (printed
on the turntable), release lever G to
block the turntable in the setting. The
lever will flick back to its start position.
Also tighten down knob H to prevent the
machine from shaking during operation.
Attention:
1. Move the saw-motor arm left or right
to make sure it is firmly secured in
place.
2. Angles between the semi-automatic
settings are obtained by blocking the
rotating table with knob G.
Fig 9
G
Fig 8
H