Promac SY-350-ALU, Инструкция по эксплуатации и каталог запасных частей

Страница: 11 / 24

11
Adjusting the arm angle
The saw-motor arm can only be tilted
leftwards to a maximum angle of 45°
(end of the stroke), but the turntable can
be tilted to any angle.
The arm is tilted as follows:
1. Unlock the screw, L (Fig 10), at the
back of the machine.
2. Tilt the saw-motor arm as
requested using the handgrip. The
angle can be checked on the scale
printed next to the hinge for
rotation. Once you have tilted the
arm enough, lock the screw again
(Fig 11).
Attention:
During cutting operations, keep a firm
hold on the handle and hold the work
piece against the table and the fence.
L
Fig 10
Fig 11