Promac SX-824DG, Руководство пользователя

Страница: 42 / 58

En 8 / 56
cutting.
Adjust the spring and (A) (fig.S3) to use manual
operation
5. Select the blade cutting speed
(B) (fig.S1)
6.
Emergency Stop switch
(C) (fig.S1)
Fig. S3
7-2.ADJUSTING UPWARD AND DOWNWARD
TRAVEL OF SAW ARM
The downward travel of the saw arm should be
adjusted so that when the saw arm is in the
extreme downward position, the teeth of the
blade will not touch the table surface. The stop
screw (G) (fig.S4) is used to adjust the distance
between blade and table surface. After the
distance is adjusted, tighten lock nut.
The screw (F) (fig.S4) is used to adjust the saw
arm upward angle, tighten lock nut.
Fig. S4
7-2. End-cutting adjustment
Loosen the screw (F) (fig.S5) , adjust the switch
touch plate (F) (fig.S5) up or down .
Fig. S5
7-3.ADJUSTING BLADE TENSION AND BLADE
TRACKING
To tension the blade, turn the blade tension handle
(fig. 1)(A) clockwise.
To set up at the middle of green position .
Fig. 1
7-4.ADJUSTING CUTTING WIDTH
First loosen screw (A) (fig.2). Move the left blade
guide bar to the suitable position. Then tighten
screw (A).
Fig. 2
7-5.ADJUSTING BLADE GUIDE ROLLER