Promac 378VTE, Руководство пользователя

Страница: 17 / 27

15
11. Withdraw drill bit
6
1. Bracket bar. 4. Completely insert bracket bar and ready for operating.
2. Setting hole for bracket bar 4-1. Rotate the spindle until the inner drift-key slot is aligned with the
outer slot, as shown in ( Figure 4-1 ). You will see through the
spindle when the slot is properly aligned.
3. Insert bracket bar into setting hole 5. Recommend to use special designed wedge for withdrawing tooling
6. Don't push spindle stroke too long to avoid spindle stick.
4-1
Both Slots
Aligned