Promac 378VTE, Руководство пользователя

Страница: 14 / 27

12
9-5. Adjustment of feeding limit
To prevent unwanted penetration to work piece, the feeding limit shall
be set by adjusting the appropriate position of feeding depth fixing button
as long as the distance between the end of tool and top surface if work
piece is measured.
A. Setting of feeding depth Feed Depth Adjustment
9-6. Adjust work table position
(1)Firstly, loose the clamp handle in left hand
(Figure 19)
(2)Then swing the table handle to properly position. (Figure 20)
(3)Finally tight the clamp handle. (Figure 19)
A
Figure 19 Figure 20