Polishing Precautions
1. Before polishing, please check if there are granular hard objects (like sand) under the floor polishing
machine or adhesive foreign matters on the polishing disc; otherwise, the floor waxing machine will be
damaged and your floor will be scratched. Once the floor is scratched, it can’t be recovered.
2. If it is necessary to install or replace the polishing piece before or during polishing, please remove the power
plug.
3. During use, please be sure to keep a Fine Polishing Seat. If discovering that the floor waxing machine has
increased resistance increase during use, please stop the machine immediately to check it and ensure that
the Fine Polishing Seat is dry.
4. It can’t be operated on a wet floors.
5. In order to get better polishing effect, please uniformly polish every square water of ground for more than
one minute.
6. Do not clean the Fine Polishing Seat with water to avoid degumming.
7. Please use the floor waxing machine referring to the Instructions in this manual.
8. When using this floor waxing machine for polishing, please constantly move it on the polishing surface, and
avoid leaving it in one spot. During operation, the machine can’t be operated under heavy load; otherwise,
you floor may be scratched and the motor may over heat.
Cleaning and Replacement of Parts
Before part cleaning and polishing, please disconnect the electrical power cord from the wall outlet first.
Rough
Polishing
Brush Disc
Polishing fine pad
Polishing
scouring
pad
Fine Polishing Seat
brush disc
Washable
Washable
Non-washable
①
Clean
the
Rough Polishing
Brush Disc with
water.
②
Wipe off the
Rough Polishing
Brush Disc with
cloth and dry it.
③
Install the parts
in turn.
①
Clean the polishing piece (rubbing is
allowed).
②
Wipe off the polishing piece with cloth
and dry it (rubbing is allowed).
③
Install the parts in turn.
①
Clean the Fine
Polishing
Seat
with a piece of
clean cloth and
dry it.
②
Install the parts in
turn.
