21
5. Replace the oil plug.
6. Replace the cover plate and perform the Air Purge Procedure.
To replace oil jack
1. Position the jack on level ground and lower the saddle.
2. Open release valve by turning handle counter-clockwise.
3. Remove cover plate.
4. Remove the oil plug.
5. Turn the jack on its side to drain old oil from the oil fi ll hole.
6. Position the jack on level ground and keep saddle in the lowered position. Fill the oil case until oil level is
just beneath the lower rim. Keep clear of dirt and other foreign materials when pouring the oil.
7. Replace the oil plug.
8. Replace the cover plate and perform the Air Purge Procedure.
ADDITIONAL WARNINGS
- DO NOT USE MOTOR OIL IN THE JACK.
- ONLY USE ANTI-FOAMING JACK OIL.
- ALWAYS USE A GOOD GRADE HYDRAULIC JACK OIL.
- DO NOT USE HYDRAULIC BRAKE FLUID, ALCOHOL, GLYCERIN DETERGENT, MOTOR OIL OR DIRTY OIL.
- USE OF A NON-RECOMMENDED FLUID CAN CAUSE DAMAGE TO A JACK.
- AVOID MIXING DIFFERENT TYPES OF FLUID AND NEVER USE BRAKE FLUID, TURBINE OIL, TRANSMISSION
FLUID, MOTOR OIL OR GLYCERIN. IMPROPER FLUID CAN CAUSE PREMATURE FAILURE OF THE JACK AND
THE POTENTIAL FOR SUDDEN AND IMMEDIATE LOSS OF LOAD.
- DISPOSE OF HYDRAULIC FLUID IN ACCORDANCE WITH LOCAL REGULATIONS.
English
Original operating instruction - 2.5 ton aluminium steel service jack
