14 English
Original operating instruction - 2.5 ton aluminium steel service jack
English - Code no.: 431045
Index
Safety markings
Technical specifications
Assembly
System air purge procedure
Before use
Operation
Maintenance instructions
To add oil to the jack
To replace jack oil
Assembly diagram
Troubleshooting
Warranty notice
Safety markings
Warning
1. Study, understand, and follow all instructions before operating this device.
2. Do not exceed rated capacity.
3. Use only on hard, level surfaces, with less than 3 degrees of slope.
4. Lifting device only. Immediately after lifting, support the vehicle with appropriate means.
5. Do not move or dolly the vehicle while on the jack.
6. Lift only on areas of the vehicle as specified by the vehicel manufacturer.
7. No alterations shall be made to this product.
8. Only attachments and/or adaptors supplied by the manufacturer shall be used.
9. Do not get under or allow anyone under the vehicle until it has been supported by jack stands.
10. Center load on saddle prior to lifting.
11. Use wheel chocks or other blocking device on opposing wheels before using jack.
12. Never use the jack on a lawn mower or on a lawn tractor.
13. Do not use the jack for any use other than the manufacturer specified usage.
14. Do not rock the vehicle while working on or around equipment.
15. The following are not recommended for supporting on this equipment: Foundations, Homes, Mobile
Homes, Trailers, RV’s, Campers, nor Fifth Wheels, etc...
16. Failure to heed these markings may result in personal injury and/or property damage.
Technical specifications
14
14
15
17
18
19
19
20
21
22
25
25
Capacity
Lifting range min.
(mm)
Lifting range
max. (mm)
without adaptor
2.5 ton
85
465
with S.U.V. adaptor
2.5 ton
161
541
