- 8 -
ASSEMBLY AND OPERATING INSTRUCTIONS
NOTE:
Always remove the power plug from the wall outlet before assembling or removing accessories.
ATTACHING THE FLEXIBLE HOSE & TELESCOPIC WAND TO THE
VACUUM
The flexible hose should be connected before attaching the wand.
1.
To connect the flexible hose to the unit, slide the hose connector over the air inlet (Fig 1).
2.
To connect the flexible hose to the telescopic wand, slide the attachment end of the hose connection
over the lower end of the telescopic wand (Fig 2).
3.
To adjust the wand, place your thumb on the black button, and press down with a force parallel to
the wand; then slide the wand in our out to desired length.
4.
Plug the power cord into the electric outlet.
5.
To remove the flexible hose, unplug the power cord and pull the hose connector from the air inlet.
6.
Pull the handle out from the telescopic wand (Fig 2).