REFLEXs
16
3.14 FIXTURE SETTING
•
Press the MENU button until the display shows one of the following, and then press the ENTER button.
•
Set the desired parameter using the UP/DOWN button and press the ENTER button to confirm the set-
ting.
-
Pan Inverse
- Used for reversing Pan movement. Select
Pan Inverse
, press ENTER button to confirm,
present mode will blink on the display, use UP/DOWN button to select
No
(normal) or
Yes
(pan
inverse), press ENTER button to store.
-
Tilt Inverse -
Used for reversing tilt movement. Select
Tilt Inverse
, press ENTER button to confirm, present
mode will blink on the display, use UP/DOWN button to select
No
(normal) or
Yes
(tilt inverse), press
ENTER button to store.
-
Back Light
- Display backlight. Select
Back Light
, press ENTER button to confirm. Use the UP/DOWN
keys to select
On
for display always on or
Off
for setting display off one minute after the exit from the
menu.
-
White Balance
- Select
White Balance
, press ENTER button to confirm. Use UP/DOWN button to select
Red, Green or Blue
(Red, Green, Blue)
. Once selected, press ENTER button, then use UP/DOWN button
to adjust the value from 125 to 255, press ENTER button to store.
-
Dimmer Curve
- Adjusting the dimmer. Enter in
Dimmer Curve
to select specific dimming curve.
Particularly when set:
•
Mode1:
The increase in light intensity is linear
•
Mode2:
Light intensity control is finger at low levels and coarse at high levels.
•
Mode3:
Light intensity control is finger at high levels and coarse at low levels.
•
Mode4:
Light intensity control is finger at low levels and high levels and coarse at medium levels.
•
Press MENU button back to the last menu or let the unit idle one minute to exit menu mode.
3.15 FIXTURE TEST
Auto Test
Allow checking the proper functioning of the unit. Start the automatic test in the following way:
•
Press the MENU button and select through directional buttons the
Fixture Test
menu voice, then select
Auto Test
.
•
To confirm and start the automatic test press the ENTER button.
Manual Test
Allows you to adjust effects from the control panel to obtain perfect uniformity between the projectors.
•
Press the MENU button and select through the directional buttons the
Manual Test
menu voice, then-
press the ENTER button to confirm the choice.
•
Select the parameter to be changed between (
Pan, Tilt, Red, Green, Blue, White, Zoom, Dimmer, Strobe)
and
press the ENTER button to confirm the choice.
•
Set the desired parameter value between the
0 - 255
range using the UP/DOWN buttons and press the
ENTER button to confirm the setting.
3.16 RESET FUNCTIONS
•
Press the button MENU so many times until the display shows
PRO Default
, then press the button ENTER.
Select
YES
to reset the default values.
•
Press the button MENU so many times until the display shows
Reset
, then press the button ENTER to
reset the projector.
Содержание REFLEXs
