17
PANORAMA IP AIRBEAM
-
Temperature
- Through the Temperature function can be displayed the temperature inside the fix-
ture, near the lamp. The temperature can be displayed in degrees Celsius or Fahrenheit.
-
Fans Speed
- Through the Fans Speed function you can show on display the fan speed present near
the lamp. Velocity is expressed in RPM (revolutions per minute).
-
Channel Value
- Channel Value function can be used to display the values of the channels by which
the unit will operate when switched on.
-
Error Message
- Through the Error Message function can be displayed any errors channels.
-
Fixture Model
- Through the Fixture Model function can be displayed the model number and manu-
facturer.
-
Software Version
- Through Software Version function you can display the currently installed software
version.
• Press the LEFT button repeatedly to exit the menu.
3.14 OPERATIONS IN AUTOMATIC MODE
The unit independently runs through its show. Before you send an automatic program you need to set the
drive as Master/Alone:
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll through the menu, select
Select Chase
and press the ENTER button
to enter the next menu.
• Press the UP/DOWN button to scroll through the menu, then select
Chase Part 1/Chase Part 2/Chase Part 3
and press ENTER to confirm.
• Press the UP/DOWN button to select
Chase1-Chase8
, and press the ENTER button to confirm.
• Press the LEFT button repeatedly to exit the menu and save changes.
Edit Chases
The function
Edit Chases
allows you to create automatic pre-programmed show.
The automatic programs
Chase Part1/2/3
are each divided into
Chase1-Chase8
. Each Chase can be composed
of
1-64 step
that can be configured through the following procedure:
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the
Stand A
lone icon, then press the ENTER button
to enter the next menu.
• Press the UP/DOWN button to scroll through the menu, select
Edit Chases
and press the ENTER button
to enter the next menu.
• Press the UP/DOWN button to scroll through the menu, select
Edit Chase 1 - Edit Chase 8
, then press the
ENTER button to confirm.
• Press the UP/DOWN button to select the
Step 01 - Step 64
, and press ENTER to confirm.
• Press the UP/DOWN button to select the
Scene
you want to set for the Step chosen, and then press
ENTER to confirm.
• Press the LEFT button repeatedly to exit the menu and save changes.
Edit Scenes
The function
Edit Scenes
allows you to create individual scenes to be included in the Chase Step.
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the
Stand A
lone icon, then press the ENTER button
to enter the next menu.
• Press the UP/DOWN button to scroll through the menu, select
Edit Scenes
and press the ENTER button
to enter the next menu.
Содержание PANORAMA IP AIRBEAM
