ProLights PANORAMA IP AIRBEAM, Руководство пользователя

Страница: 15 / 68

13 PANORAMA IP AIRBEAM
3.11 SETUP
You can change the parameters for the device by following these steps:
LAMP
You can change the parameters related to the lamp of the device by proceeding as follows:
• Press the ENTER button to access the main menu.
• Press the UP / DOWN button to scroll through the menu, select
Set up , then press the ENTER button to
access the next menu.
• Press the UP / DOWN button to select one of the following settings and press the ENTER button to
display it.
- Turn On/Off - Turn the lamp on or off from the control panel. Select Off to turn off the lamp; On for
lamp ignition.
- Automatic - Lamp status when the unit is in operation. Select Off to turn off the lamp when the unit is
in operation; On to switch on the lamp when the unit is in operation.
- DMX Control - Enable the lamp remote control channel. Select Off to deactivate the function or On to
activate the function.
• Press the ENTER key to confirm the choice.
• Press the LEFT key several times to exit the menu and to save the changes made.
TEMPERATURE
You can change the parameters of the device by following these steps:
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the
Set up , then press the ENTER button to enter
Number of
DMX channels
Start address
(example)
DMX Address
occupied
Next possible start
address for unit No. 1
Next possible start
address for unit No. 2
Next possible start
address for unit No. 3
19 33 33-51 52 71 90
24 33 33-56 57 80 104
28 33 33-60 61 85 109
DMX Address: 90 DMX Address: 52 DMX Address: 33 DMX Address: 71
Fig.5 - Example 19 DMX channels configuration
. . . . . . . . . . . .
DMX512 Controller