ProLights GOBOZOOM, Руководство пользователя

Страница: 26 / 32

GOBOZOOM
10
3.7 DMX ADDRESSING
To able to operate the GOBOZOOM with a light controller, adjust the DMX start address for the first a DMX
channel. If e. g. address 33 on the controller is provided for controlling the function of the first DMX chan-
nel, adjust the start address 33 on the GOBOZOOM. The other functions of the light effect panel are then
automatically assigned to the following addresses.
An example with the start address 33 is shown below:
DIP-SWITCH 1 2 3 4 5 6 7 8 9
DMX VALUE 1 2 4 8 16 32 64 128 256
Switch number
1 2 4 8
16 32 64
128 256
Number of
DMX channels
Start address
(example)
DMX Address
occupied
Next possible start
address for unit No. 1
Next possible start
address for unit No. 2
Next possible start
address for unit No. 3
2 33 33-34 35 37 39
3.6 CONSTRUCTION OF THE DMX TERMINATION
The termination avoids the risk of DMX 512 signals being reflected back along the cable when they reach-
es the end of the line: under certain conditions and with certain cable lengths, this could cause them to
cancel the original signals.
The termination is prepared by soldering a 120Ω 1/4 W resistor between pins 2 and 3 of the 5-pin male
XLR connector, as shown in figure.una resistenza di 120Ω (minimo 1/4W) tra i terminali 2 e 3, così come
indicato in figura.
Esempio:
connettore XLR a 3 pin
Fig.8