ProLights GOBOZOOM, Руководство пользователя

Страница: 23 / 32

7
GOBOZOOM
2.2 REPLACE GOBOS
To replace the gobo refer to the following steps:
1. Remove power cable to GOBOZOOM
2. On the underside of the product, locate the two thumbscrews that secure the gobo holder in place
3. Remove the thumbscrews and carefully slide the gobo holder vertically apart from the product
4. Locate the gobo retainer ring and remove it.
5. Remove any gobo that may already be installed
6. Place the new color gel and gobo in position in the gobo holder, show below.
7. Reinstall the gobo retainer ring securely
8. Slide the gobo holder back into the product and tighten the two thumbscrews.
NOTE - Make sure the size of the gobo: rotating gobo size 28.6 mm outside, 26 mm image and 1mm thick.
Gobo holder thumbcrews
Color gel GOBO Gobo retainer ring
Fig.3