ProLights GOBOZOOM, Руководство пользователя

Страница: 24 / 32

GOBOZOOM
8
- 3 - FUNCTIONS AND SETTINGS
3.1 OPERATION
Connect the supplied main cable to a socket (100-240 VAC-50/60 Hz). Then the unit is ready for operation
and can be operated via a DMX controller or it independently performs its show program in succession.
To switch off, disconnect the mains plug from the socket. For a more convenient operation it is recom-
mended to connect the unit to a socket which can be switched on and off via a light switch.
3.2 SETTING OF DIP-SWITCH
The GOBOZOOM has a basic control panel consists of a DIP-switch (fig.3)
Each individual switch has a number (DIP-switch [1] to [10]).
3.3 AUTOMATIC MODE
If no DMX control signal is present at the jack DMX INPUT, and the unit independently runs through its
show programme.
• To set the automatic mode is necessary to position the DIP-switch [10] to “OFF”
• Through the Dip-switch [1 - 4] can be selected pre-set programs, as shown in following:
NOTE - The DIP-switchs will not work together. Only use one out of the 4 modes listed above
Fig.3
Fig.4
Program 1
Water effect rotating, color rotating
Program 3
Water effect rotating, color static
Program 2
Water effect static, color rotating
Program 4
Water effect static, color static