ProLights EVO128CYC, Руководство пользователя

Страница: 31 / 52

7
EVO128CYC
- 2 - INSTALLATION
2.1 MOUNTING
EVO128CYC may be set up on a solid and even surface. The unit can also be mounted upside down to a
cross arm. For fixing, stable mounting clips are required. The mounting place must be of sufficient stability
and be able to support a weight of 10 times of the unit’s weight.
As you can see in the illustration, the pins of the quick coupling system, omega supports, are to be in-
cluded in the seats where the projector is locked with a clockwise rotation (until it stops).
When carrying out any installation, always comply scrupulously with all the regulations (particularly re-
garding safety) currently in force in the country in which the fixture’s being used.
• Install the projector at a suitable location by means of the mounting bracket.
• Always additionally secure the projector with the safety rope from falling down. For this purpose, fas-
ten the safety rope at a suitable position so that the maximum fall of the projector will be 20 cm.
• Adjust the projector and use the knob to slightly release or tighten the locking mechanism of the
bracket if is necessary.
Fig.4