ProLights EVO128CYC, Руководство пользователя

Страница: 33 / 52

9
EVO128CYC
3.3 MENU STRUCTURE
3.4 OPERATION IN AUTOMATIC MODE
If no DMX control signal is present at the DMX INPUT, the unit independently runs through its show pro-
gramme provided that the blackout mode is switched off:
• Press the button MENU so many times until the display shows [ AUTO ], then press the button ENTER.
• Press the button UP/DOWN to switch between the programs ( AT. 01 - AT.10 o PR.01 - PR.10 ). The unit will
operate in automatic mode.
NOTE - Programs AT.01 - AT.10 are fully pre-programmed and will not be altered by changes in EDIT mode.
Programs PR.01 - PR.10 are fully pre-programmed and can be edited in EDIT mode.
In automatic mode the unit will be set as Master.
STAT
RED
R.(000-255)
GREN G.(000-255)
BLUE b.(000-255)
WHIT W.(000-255)
AMBE A.(000-255)
STRB
S.(0-20)
AUTO
AT.01 ÷ AT.10 P.(0-255)
PR.01 ÷ PR.10
RUN DMX / SLAVE
ADDR D.(001-512)
PERS TOUR / TR16 / ARC.1 / AR1.D / ARC.2 / ARC.3 / AR3.D / AR3.S / HSV / PIX1 / PIX3
EDIT PR.01 ÷ PR.10
SC.01
RED, GREN,
BLUE, WHIT, AMBE,
STRB, TIME, FADE
R.(000-255), G.(000-255),
B.(000-255), W(000-255), A(000-255)
S.(0-20), T.(000-255), F.(000-255)
...
SC.30
SET
KEY ON/OFF
UPLd **** SEND OK
REST ****
REST OK
COLR OFF/ RGBw / UC
dIMX DIM4 / DIM1 / DIM2 / DIM3 / OFF
CURV
OFF / CV1 / CV2 / CV3
DERR SAVE/ BLAK
SLCK
OFF/ON
STRB SPEC/CLAS
MCON SELF/MAST
CAL
(Password:
UP-DOWN
UP-DOWN)
****
CAL1 WH.01 ÷ WH.11
R.(000-255)
G.(000-255)
B.(000-255)
W.(000-255)
A.(000-255)
CAL2 RGBw
R.(000-255)
G.(000-255)
b.(000-255)
CALR **** OK