FLEXlm Utilities
66
2-Tier Installation
lmhostid
Prints the correct hostid value on any machine supported by FLEXlm
lmhostid [
type
]
The type of the hostid to print.
type
must be one of
long
,
idmodule
,
ether
, or
string
, and is currently used only on HP and SCO systems. On HP,
type
specifies
the ID module, the machine id as returned from the
uname
command, or the
Ethernet address. The HP default is
long–uname
. On SCO,
long
specifies the
pre-3.0 default, which was a 32-bit long int, while
string
specifies a string host,
which is the new default.
Output from
lmhostid
is similar to the following:
lmhostid – Copyright (C) 1997, Globetrotter Software, Inc.
The FLEXlm host ID of this machine is “1700abcd”
type
Description
