background image

2

 

IMPORTANT SAFETY INFORMATION

 

Please read this manual thoroughly before use and store in a safe place for  
future reference.

 

 

WARNINGS

• 

This unit has been designed for 12V vehicles only. 

• 

Risk of explosive gas. Working in the vicinity of car batteries can be dangerous. 
Batteries release explosive gases during normal operation, charging and while 
jumpstarting a battery. Before using this Jumpstarter, read and follow the instructions 
carefully. Follow all manufacturer’s instructions and warnings of the vehicle’s battery 
and other equipment being used.

• 

Jumpstart 12V automotive lead acid batteries only. Do not use to jumpstart dry cell 
batteries commonly found in household appliances. These batteries may burst and 
cause injury and/or property damage.

• 

Do not smoke, use matches, use a cigarette lighter, or allow a spark or flame near 
the battery.

• 

Do not allow metal to come in contact with the battery posts. It may spark or  
short-circuit the battery and cause an explosion/fire.

• 

Remove rings, bracelets, necklaces, and watches when working at the vehicle and/or 
jumpstarting a vehicle.

• 

The Jumpstarter contains a sealed non-spillable Lithium Iron Phosphate battery 
(LiFePO

4

). This must be disposed of properly.

• 

Ensure correct polarity when connecting clamps to vehicle.

• 

The Jumpstarter is not designed to be left outside for extended periods of time or 
submerged in water.

• 

Do not store the Jumpstarter in temperatures above 60˚C or below -10˚C, as this can 
affect the health of the battery.

• 

Always wear eye protection when operating the Jumpstarter.

• 

Although the Jumpstarter has been designed to protect the battery, do not drop the 
Jumpstarter or try and pierce it in anyway. This can result in an explosion/fire.

• 

If the Jumpstarter is physically damaged in any way, it should not be used.

• 

Not intended for people (including children) with reduced physical or mental 
capability.

• 

Do not try and charge via the USB output as this will damage the Jumpstarter and 
the USB output.

Содержание INTELLI-START













Отзывы: