INSTALLATION OF THE PROJECTOR
Unscrew the knob (unlighted in red in Fig.1) on the back of the projector and open the
door to access the control panel.
Fig. 1
The projector can be set by pressing the button 1, on the control panel, in energy-saving
mode at 1200W and by pressing the button 2 for the maximum power mode at 2500W
(following the informations provided in the section of the technical specifications for
choosing lamps in its respective modes).
Other elements on the control panel in Figure 1 are: the power button (element A), the
main fuse of 20A for the lamp (element B), secondary fuse of 2A for accessories (element
C).
4
DMX connector
panel to remove
if you install the
DMX4 PRO
control unit
(optional)
1
2
A
B C
