-
Insert the chosen lens into the projector by making sure that knob B is centered relative
to the sagittal axis of the projector, see Fig. 8. Then attach it to the machine body by
rotating the A element on the outside, see Fig. 7.
Fig. 8
-
To take advantage of the maximum extension of the lens you need to place the knobs
at the ends, as in Figure 8. Then place the image (Gobo or dynamic e
ff
ect) centrally and
flat on the plate, following the guides. The ideal focus can be found by moving the
image back and forth, as shown in Fig. 9.
Fig. 9
10
B
direction of
insertion
