Progressive Turf Equipment 13921943 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 62

Progressive Turf Equipment 13921943 Скачать руководство пользователя страница 7

7

GENERAL INFORMATION

:

The  purpose  of  this  manual  is  to  assist  the  operator  in  maintaining  and
operating  Progressive  Turf  Equipment  mowers.    Read  it  carefully.    It
furnishes  information  and  instructions  that  will  help  you  achieve  years  of
dependable performance.

Some information may be general in nature due to unknown and varying
conditions. However, through experience and these instructions you should
be able to develop operating procedures suitable to your particular situation.

Throughout  this  manual,  references  are  made  to  right  and  left  directions.
These  are  determined  by  standing  at  the  rear  of  the  equipment  and  facing
the  direction  of  forward  travel.    Blade  rotation  is  counter-clockwise  as
viewed from the top of the mower.

For quick reference, record the following information.

MODEL:

TD92

DATE PURCHASED: ___________________________

SERIAL NUMBER: ___________________________

For additional information, assistance during assembly, or operation of this
mower contact Dealer machine was purchased from, or call Progressive
Turf Equipment Inc.

PHONE: 519-527-1080

1-800-668-8873

FAX: 519-527-2275

«
...
5
6
7
8
9
...
»

Содержание 13921943































































Отзывы:

Нет отзывов