Progressive Turf Equipment 13921943 Скачать руководство пользователя страница 10

Страница: 10 / 62

SAFETY

WORK SAFELY ---- FOLLOW THESE RULES

Instructions given with this symbol are for personal
safety. Be sure you and your workers follow them.

A CAREFUL OPERATOR IS THE BEST

INSURANCE AGAINST AN ACCIDENT

BEFORE HANDLING ANY EQUIPMENT READ

THE OPERATOR’S

MANUAL.



To avoid accident or injury, do not allow anyone to operate this equipment
without proper instructions. Any person who operates this equipment must
be instructed in and be capable of the safe operation of the unit.



Know your controls and how to stop tractor, engine, and mower quickly in
an emergency.

OPERATING SAFELY



Shift tractor into neutral and disengage power take-off before starting
tractor.



Never allow riders on tractor or equipment.



Use extreme care when operating on uneven terrain.



Immediately stop mower and shut off tractor upon striking any object.
Inspect mower and repair any damage before you continue mowing.



Always turn off tractor before making any adjustments to mower, if
operator has to dismount tractor.



If mower becomes clogged, disengage power to mower and turn off tractor
before dismounting.



Always disengage PTO and be sure driveline has stopped rotating before
raising decks into transport position.



Always obey all local and state regulations when operating on public
roadways and highways.



Reduce speed while operating during wet conditions on slopes, especially
when making sharp turns.

Содержание 13921943































































Результаты поиска

Содержание 13921943

Отзывы:

Похожие инструкции для 13921943

Бренды по названию

Популярные бренды

Progressive Turf Equipment 13921943, Руководство оператора и список запасных частей

Результаты поиска

Содержание 13921943

Отзывы:

Похожие инструкции для 13921943

Бренды по названию

Популярные бренды