
When the cleaning is completed, install the
glass panels and the oven door.
Make sure that you put the glass panels (A, B
and C) back in the correct sequence. Check
for the symbol / printing on the side of the
glass panel, each of the glass panels looks
different to make the disassembly and
assembly easier.
When installed correctly the door trim clicks.
A
B
C
Make sure that you install the middle panel of
glass in the seats correctly.
A
B
C
11.7 Replacing the lamp
WARNING!
Risk of electric shock.
The lamp can be hot.
1. Turn off the oven.
Wait until the oven is cooled down.
2. Disconnect the oven from the mains.
3. Put a cloth on the bottom of the cavity.
The back lamp
1. Turn the lamp glass cover to remove it.
2. Clean the glass cover.
3. Replace the lamp with a suitable 300 °C
heat-resistant lamp.
4. Install the glass cover.
12. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
12.1 What to do if...
Problem
Possible cause
Remedy
You cannot activate or operate
the oven.
The oven is not connected to an
electrical supply or it is connected
incorrectly.
Check if the oven is correctly
connected to the electrical supply
(refer to the connection diagram if
available).
The oven does not heat up.
The oven is deactivated.
Activate the oven.
The oven does not heat up.
The clock is not set.
Set the clock.
The oven does not heat up.
The necessary settings are not
set.
Make sure that the settings are
correct.
The oven does not heat up.
The automatic switch-off is acti‐
vated.
Refer to "Automatic switch-off".
ENGLISH 23