Progres Agronic, Инструкция по эксплуатации

Страница: 5 / 10

5
Outlet assignation tables according to unit models.
Model
Outlets Input 220V, outlets 24V Input 12V, outlets 12V Input 12V, outlets 12V
Latch option 3 cables
CP Box terminal, connected to earth (build-in model). Stop common
C Outlet common 24 V. Outlet common 12 V. Start common
M General valve
1-6
1-12
1-18
Filter outlets
3.3. GUIDE TO MALFUNCTIONS
- Valves do not work:
Check the state of the fuses.
Check if any cable is disconnected or cut.
- The equipment does not work properly:
a) There is a black stripe on the screen:
Unplug the unit, open it, remove the keyboard
and, with a screwdriver, cross the two contacts on
the central part of the left side marked as “J3”,
during two seconds, and reconnect the supply.
b) The screen is completely blank:
Check whether the power reaches the
equipment.
Check the state of the fuses.
- The unit fuses the general fuse constantly:
The overload protector is short-circuited, it is
necessary to replace it. This happens when the unit
is supplied at 380V, for example, or there is an
overload due to a storm and the “general fuse” is
superior to the one indicated in the section about
technical characteristics.