Programma EGIL BM-19070, Руководство пользователя

Страница: 17 / 80

P r o g r a m m a E l e c t r i c A B
Z P - B M 0 1 D R 0 7 A
1 7
E G I L
Option - >
Options
As an option, Egil can be equipped with a motion meas-
urement input. An analog channel gives you the ability to
measure motion (using resistive motion transducers) or for
voltage or current measurements.
Egil can also be equipped with an optional serial interface
for communication with a personal computer. This will
support communication with the CABA analysis program.
Option - End
4.2 Main blocks of
front panel
The main blocks of the front panel are:
1. Main power supply
2. Sequencer.
3. Time/motion/serial inputs
4. Printer
5. Display window and keyboard
Chapter 5 (Control panel) describes the control panel
function.
The main power supply
The power supply block is equipped with a fuse, a main
switch, the connector for mains voltage, ground terminal
and mains voltage switch 115 V/230 V.
Sequencer
The sequencer block is equipped with fuses for breaker
control outputs and close and trip coil inputs/outputs.
There is also a built-in galvanically isolated analog current
transducers to measure the current in the trip and the close
circuit. AC and DC current up to 50 A is measured.
Time/motion/serial inputs
The time/motion/serial input block is equipped with inputs
for measuring time and motion and a serial communica-
tion terminal.
Printer
The printer block is equipped with a built-in printer for
printing results and test conditions, numeral and graphical.
† ‡
‰
ˆ