THERMAL CUT-OUT
The heater will automatically turn off should it overheat. When this happens, the red
indicator will turn on. After the unit has cooled back down to a normal level, the heater will turn
ON again and the red indicator will turn off,
but the reason of
the overheating must be
determined and corrective action must be taken before further operation.
THE HEATER MUST BE TURNED OFF IMMEDIATELY WHEN THE CAUTION INDICATOR
IS GLOWING RED.
NOTE: When the thermal cut-out is activated, the caution indicator will turn red. In this
case, immediately turn the heater OFF and inspect for any objects on or adjacent to the
heater that may cause high temperatures.
MAINTENANCE INSTRUCTIONS
1.
Before cleaning, make sure the power has been turned off at the circuit breaker
panel and the heating element of the heater is completely cool.
2. To maintain the appearance of the heater, it needs only to be wiped over
occasionally with a dry duster. During the summer months, or at other times
when the appliance is not in use and is completely cold, it can be cleaned by
wiping it with a damp cloth. Do not let water drip inside the heater.
3. Do not use abrasive cleaning powders or furniture polish to clean this appliance.
Do not use chemical or abrasive products, metallic scourers and similar items;
they may deteriorate the surface.
4. During the summer months, or at other times when the appliance is not in use,
disconnect the power supply, and cover the whole appliance with a dust cloth.
Store the appliance in a dry and cool place.
5. All servicing should be performed by qualified service personnel. Do not try to
repair the heater yourself.
