background image

3

IMPORTANT PRECAUTIONS

    WARNING:

 To reduce the risk of burns, fire, electric shock, or injury to persons, read all 

important precautions and instructions in this manual and all warnings on your training bike before 

using your training bike. ICON assumes no responsibility for personal injury or property damage 

sustained by or through the use of this product.

1.  It is the responsibility of the owner to ensure 

that all users of the training bike are ade-

quately informed of all precautions. 

2.  Before beginning any exercise program, 

consult your physician. This is especially 

important for persons over age 35 or per-

sons with pre-existing health problems.

3.  The training bike is not intended for use by 

persons with reduced physical, sensory, or 

mental capabilities or lack of experience and 

knowledge, unless they are given supervi-

sion or instruction about use of the training 

bike by someone responsible for their safety.

4.  Use the training bike only as described in 

this manual.

5.  The training bike is intended for home use 

only. Do not use the training bike in a com-

mercial, rental, or institutional setting.

6.  Keep the training bike indoors, away from 

moisture and dust. Do not put the training 

bike in a garage or covered patio, or near 

water. 

7.  Place the training bike on a level surface with 

at least 2 ft. (0.6 m) of clearance around the 

training bike. To protect the floor or carpet 

from damage, place a mat under the training 

bike.

8.  Inspect and properly tighten all parts each 

time the training bike is used. Replace any 

worn parts immediately.

9.  Keep children under age 13 and pets away 

from the training bike at all times.

10. When connecting the power cord, plug the 

power cord into a grounded circuit. 

11. Do not modify the power cord or use an 

adapter to connect the power cord to an 

improper receptacle. Keep the power cord 

away from heated surfaces. Do not use an 

extension cord.

12. Do not operate the training bike if the power 

cord or plug is damaged, or if the training 

bike is not working properly.

13.  

DANGER:

 

Always unplug the power 

cord and press the power switch to the off 

position when the training bike is not in 

use and before cleaning the training bike. 

Servicing other than the procedures in this 

manual should be performed by an autho-

rized service representative only.

14. Wear appropriate clothes while exercising; 

do not wear loose clothes that could become 

caught on the training bike. Always wear 

athletic shoes for foot protection.

Содержание PFEX01416.1









































Отзывы: