ProForm PFEL53408.1, Руководство пользователя

Страница: 5 / 24

5
ASSEMBLY
To hire an authorized service technician to assemble the elliptical exerciser, call 1-800-445-2480.
Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed.
Assembly requires the included tool(s) and your own Phillips screwdriver , adjustable
wrench , and rubber mallet .
As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parenthe-
ses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The
number following the parentheses is the quantity needed for assembly. Note: Some small parts may have
been preassembled. If a part is not in the hardware kit, check to see if it has been preassembled.
M10 x 70mm Patch Screw (75)–6
M4 x 16mm
Screw (84)–14
M4 x 32mm Screw
(95)–2
M6 x 16mm Patch
Screw (80)–2
M6 x 36mm Bolt
(76)–4
Wave Washer
(88)–2
M6 Locknut
(77)–6
M10 x 20mm Patch
Screw (79)–4
M10 x 35mm Shoulder
Screw (63)–2
M4 x 12mm
Screw (35)–10
M4 x 16mm
Round Head
Screw (94)–4
M6 x 16mm x
1.5mm Washer
(36)–2
M10 Black Split
Washer (96)–6
M6 x 25mm x
1.5mm Washer
(33)–2
M6 x 71.5mm Shoulder Bolt (31)–2
M10 Bright Split
Washer (78)–4