ProForm PFEL53408.1, Руководство пользователя

Страница: 7 / 24

7
4. Tip: Avoid pinching the Wire Harness (49)
during this step.
Orient the Water Bottle Holder (5) as shown
and slide it onto the Upright (2). Attach the
Water Bottle Holder with two M4 x 32mm
Screws (95).
Slide the Console Cover (32) onto the Upright
(2) and move it downward to the Water Bottle
Holder (5). Then, insert the Console Bracket (3)
into the top of the Upright. Attach the Console
Bracket with four M4 x 12mm Screws (35).
4
Avoid pinching the
Wire Harness (49)
35
35
95
49
32
3
5
2
3. Have another person hold the Upright (2) near
the Frame (1).
Locate the wire tie in the Upright (2). Tie the
lower end of the wire tie to the Wire Harness
(49). Next, pull the upper end of the wire tie
upward out of the top of the Upright. Then, untie
and discard the wire tie. Tip: To prevent the
Wire Harness from falling inside the Upright,
secure the Wire Harness with a rubber band.
Slide the Upright (2) onto the Frame (1).
Tip: Avoid pinching the Wire Harness (49).
Attach the Upright (2) with four M10 x 20mm
Patch Screws (79) and four M10 Bright Split
Washers (78). Tip: Start all four Patch Screws
before tightening any of them.
3
Avoid pinching the
Wire Harness (49)
2
1
49
78
78
78
79
79
79
Wire Tie