MEMORY
The TX-550vm has a memory capacity of 13 telephone numbers of 16 digits
each (pause included).
PROGRAMMING MEMORY-NUMBERS:
1.
pick up the handset and put it aside
2.
press the STORE button and release it
3.
key in the telephone number on the keyboard
4.
press STORE again
5.
press one of the three memory buttons (M1/M3) or one of the keys (0-9) on
the keyboard
6.
repeat steps 2 to 5 for the other memory positions
7.
replace the handset on the base unit
DIALING FROM MEMORY:
1.
pick up the handset and wait for the dialtone
2.
press one of the three memory buttons (M1/M3) or press memory, followed
by one of the keys (0-9) on the keyboard
3.
the programmed number will automatically be dialed
Remarks:
*
When your telephone is connected to a PABX system, it is advised to
include a dialing-pause in the number. Refer to the chapter PAUSE.
*
The power to uphold the memories is taken from the telephone net, make
sure the telephone stays connected to the telephone net.
*
You may however disconnect the telephone to move it. A built-in capacitor
will keep the memory's for a few minutes.
*
It's not possible to erase a memory position, just reprogram them to erase
the present number.
*
Memory location M3 can be used to store the telephonenumber of your
VoiceMail. In case you have no Voicemail, you can store any frequently
dialed telephonenumber.
15
