Shorts of battery terminals may cause burns or fires.
j
)
Never throw batteries to fireplaces.
k
)
Never charge a damaged battery.
The batteries are intended for multiple use and contain
harmful lithium.
Upon the battery lifetime expires the battery must be disposed
in accordance with environmental regulations. Discharge the
battery first top the empty state and remove from the electric tool. Hand
over to an organization that deals with utilization of batteries or take it
back to the shop where the tool had been purchased.
Using the charger:
a)
Use only dedicated power adapters to charge the battery.
Application of a power adapter dedicated to charge another type of the
battery unit poses a risk of fires.
b)
Do not disassemble the charger.
c)
The charger is designed exclusively for indoor use.
It must not be
exposed to water or moisture.
d)
Charge only in an ambient temperature between 15-25
degrees.
e)
Do not insert metal objects of any kind into the charger.
CONSTRUCTION AND PURPOSE OF THE JIGSAW:
The cordless jigsaw is equipped with an electronic speed control system.
Speed regulation and 4-step adjustment of the blade's movement allow
optimal cutting process efficiency.
The jigsaw is used for making cuts and patterns in wood and similar
materials, plastics, metal, ceramic plates and rubber. The cutting process
is performed using a suitable saw blade, appropriate to the material
being processed.
The device can be sued for straight cuts and angled cuts at an angle of up
to 45°. It is intended for domestic and industrial use of average intensity.
It is not suitable for long-term work in difficult conditions.
Do never use the tool for applications that need use of
professional equipment.
Each application of the tool not in line with
the intended use as specified below is strictly forbidden and makes the
warranty terms null and void. The manufacturer shall not be held
responsible for possible consequential damage that may arise due to or
in connection with such application.
Any modifications of the tool by the user relieve the manufacturer from
responsibility for any damage and injuries to the user and the
surroundings.
Proper use of the jigsaw also applies to maintenance, storage, transport
and repairs.
The jigsaw can be repaired only at service centres designated by the
manufacturer. Battery-powered devices should be repaired only by
authorised persons.
Proper use cannot guarantee that no residual risk will occur. Due to the
design of the machine, the following risks may occur:
- Touching the blade while working in the unprotected area of the
jigsaw;
- Burns when replacing the blade. (The blade gets very hot during
operation, use protective gloves to avoid burns when replacing it);
- Throwing a machined part or pieces of a machined part,
- Blade cracking/breaking;
- Hearing damage in case of failure to use necessary hearing protection;
- Harmful emissions of wood dust when working in closed premises.
n
The set includes:
ź
Cordless jigsaw -1 pc.
ź
Blade
-
2
pc.
ź
Operating instruction-
1pc.
ź
Warranty card - 1 pc.
n
Device components
The numbering of device elements refers to the drawing on pages 2-3 of the
instruction manual:
Fig.A: 1.
Contact protection
2.
Auxiliary lighting
3.
Safety button
4.
On/off switch
5.
Handle
6.
Battery*
7.
Battery lock button*
8.
Suction outlet
9.
Adjustable foot (0° - 45°)
10.
Pendulum action switch
11.
Blade
12.
Charger*
13.
Battery level indicator button*
14.
Battery level indicator*
Fig.B 15.
Blade clamp
:
Fig.E:
Foot fixing screw
s
16.
17.
Angle scale
* The accessories shown or described are not standard equipment.
For the complete offer of auxiliary equipment, see our catalogue.
TECHNICAL PARAMETERS:
The vibration level value given refers to basic application of the tool. If the
tool is used for other applications or with other tools, or if it is not
maintained properly, the vibration level may differ from the values given.
The above-mentioned causes may lead to higher exposure to vibrations
during the whole work time.
One must implement additional safety measures to protect the operators
7
Li-Ion
Max. cutting depth
Steel 6 mm
Tolerance of measurements K
2
cutting in wood
a
3
,
57
m/s
h, B
2
cutting in metal
a
4,14 m/s
h, M
Supply voltage 20 V d.c.
Stroke length
20 mm
o
o
Cutting at an angle
0 - 45
Wood 5
6
mm
Weight
(without battery)
1
,
5
kg
Acoustic pressure level (LpA)
97,93
dB(A)
Acoustic power (LwA) 86,93 dB(A)
Vibration as per
EN
62841
Rotation speed under no-load conditions n = 0-2400/min
0
Tolerance of measurements K K
LpA, LwA
3 dB(A)
2
1,5 m/s
Recommended 20 V Li-ion batteries:
VJ2AK
(2Ah),
VJ4AK
(4Ah)
Recommend charger:
VJ1LD
(1h)
