PROFILO PKM6009, Руководство пользователя

Страница: 17 / 40

17
You can check the water level by looking on the
tank (3) (min max level).
When the water level is above min. level, water
indicator (20) lights up blue.
When the water level is under min. level the
appliance will not operate and will not brew
coffee, water indicator (20) lights up
blinking red. In this case, you must add water
to the water tank (3).
Max level should not be passed when water is
filled. Exceeding the max level will cause water
leakage under the device.
While pouring water directly into the water tank
(3) mounted on the device (without removing
the water tank) be careful not to spill water on
the appliance.
5 Close the lid (5) and place the filled water tank (3) on the
appliance. After placing the water tank correctly please push
the tank down to be sure it fitted properly.
pic. 6
Water tank (3) should be inserted correctly if
not, pump will not work properly. If water tank
is not fitted well, water flow cannot occur. This
situation causes coffee mixture to have less
water than expected. The coffee’s taste will be
too bitter.
Brewing coffee
To brew coffee, follow the instructions below.
1 You can select cup size (small (17) / medium (18) / large
(19) ) by pressing cup size controller (16) . For each press,
there will be one bip. Cup size will be memorized for next
usage until changed, even though the appliance is turned off
and on.
pic. 7
2 Put coffee and sugar into the coffee pots (12) for one/two/
three cups according to the amounts recommended in below
table. Place the coffee pots (12) into the appliance. Make sure
to insert the coffee pots (12) correctly (Straight and till they hit
the wall of the cooking station. You will hear click sound when
coffee pots hits the wall of the cooking station.).
pic. 8
The appliance will not start operating until the
coffee pots (12) are correctly placed. If the
coffee pots are correctly placed you will hear
a “click” sound.