Prodys ProntoNet Скачать руководство пользователя страница 70 | Manualshive

Страница: 70 / 91

Prodys ProntoNet Скачать руководство пользователя страница 70

Prontonet IP Decoder User Manual v5.4.1.1.doc

70

An ICMP ‘ping’ packet is sent every 3 seconds in order to check
connection integrity. From version 4.8.0 on, this protocol has been
removed for security reasons.

From version 4.8.0 on, it is also possible to change these ports. For
more information about port changing, read chapter IV.1.1.1 – Ports.

V.7

SIP

The  European  Broadcast  Union  (EBU)  is  promoting  the  interoperability  of  audio
codecs  for  any  manufacturer.  For  this  purpose  the  use  and  the  application  of  a
subset  of  the  Internet  Protocols  has  been  proposed.  This  effort  will  allow  to
setup  in  a  friendly  way  audio  streaming  communications  between  several
vendors of equipment.

The deployment of SIP Protocol Servers among the network  will support  calling
remote  parties  just  by  invoking  their  network  name  regardless  of  the  actual
public  o  private  IP  addresses.  Neither  is  required  to  manage  the  office  routers
and the firewall’s TCP/IP ports for any new communication path.

The  physical  location,  often  related  to  fixed  IP  addresses  or  subnets,  is  not
further meaningful. In this sense, specially portable audio codecs will profit with
an  easy  call  procedure.  Neither  is  required  to  agree  ahead  on  the  audio
compression  type  and  data  stream  rate,  because  the  SIP  Protocol  manages  by
itself to negotiate the convenient communication details with the remote party.

For  Prodys’  former  customers  performing  a  call  using  SIP  is  much  the  same  as
using Prodys’ proprietary protocols given that the SIP configuration is set.

SIP supports up to date only unicast streaming. Any audio compression mode is
supported  also  if  SIP  protocol  is  in  use.

32

For further details please refer to the

“Technical Description” at this document.

SIP Port

: TCP/IP port dedicated to SIP signalling for establishing, updating

or finishing a call. Port 5060 is mandatory by the standard if direct calls without
gateways are expected.

Audio Port

: TCP/IP port dedicated to the RTP communication, this is the

actual port for the audio streaming payload. By default the number 5004 is
reserved.

If SIP server support is granted by your network:

32

The apt-X compression is still undefined by the EBU draft. For compatibility reason this mode is

not supported if SIP protocol is selected.

«
...
68
69
70
71
72
...
»

Содержание ProntoNet




























































































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды