Prontonet IP Decoder User Manual v5.4.1.1.doc
28
IV.1.1.2.
RS232 Port
There is one RS232 port for use as auxiliary data port. This port allows the
reception of data along with encoded audio. This port is always set to 8 DATA
bits, NO parity, 1 START bit and 1 STOP bit. The bit rate can be adjusted to
between 300 and 9600 bps via software.
IV.1.1.3.
GPIO Port
From this option the inputs and outputs of the GPIO port are configured.
INPUTS
Connect From Book
When this input is activated, the ProntoNet IP Decoder will
proceed automatically to connect the line 1 or line 2 (as
configured). The user can select which entry of the book will be
used for this purpose
7
.
Disconnect Line 1
When this input is activated, the ProntoNet IP Decoder will
proceed automatically to disconnect the line 1.
Disconnect Line 2
When this input is activated, the ProntoNet IP Decoder will
proceed automatically to disconnect the line 2.
Mute Left
When this input is activated, the left audio output will be muted.
Mute Right
When this input is activated, the right audio output will be muted.
Acknowledge alarms
When this input is activated, the alarms will be acknowledged.
Answer Line1
8
Line 1 will be picked up when receiving a call.
Answer Line2
8
Line 2 will be picked up when receiving a call.
7
Before version 5.0.0, only entries 1 and 2 of the phone book were used for calling line 1 and line
2.
8
From version 5.2.1 onwards.
