PortaNet User Manual
79 of 156
These options are also availble in the display menu:
SYS
KEYPAD
AUTOLOCK: ENABLE /DISABLE.
SYS
KEYPAD
PASSWORD: PASSWORD
VIII.4.1
Locking the keypad from the Portanet keyboard
To Lock the keypad from the PortaNet top panel keyboard, use the following key
combinations:
“OK” + “*”
To lock all the keys on the top surface.
“OK” + “#”
To lock only the dial and menu keypad, but not the audio
control keypad.
“OK” + “0”
To lock only menu keypad, but not the dial and audio control
keypad.
To unlock just press consecutively
“OK” + “*”
.
VIII.5
Audio control keypad
The audio control keypad can be controlled/monitored remotely from the web
page.
ON control
Each MIC/LINE audio input has a key to
enable/disable it. When an input is enabled, it will
contribute to the audio being sent through the
program line (line 1). The corresponding LED will light
on Green, indicating that the input is enabled and
going through the line 1.
TB control
PortaNet supports two independent communications
via IP or ISDN. Thus, we can establish one connection for the main program, and
another one for coordination, or TalkBack program. TB keys allow the connection
of the corresponding MIC/LINE audio input to the talkback channel. The
corresponding LED will light on RED.
Int. Sound control
There is an additional LINE level audio input that can be used to feed
the headphone outputs. Each headphone output has a control to enable
or disable this signal.
