PortaNet User Manual
31 of 156
In order to check or modify an audio preset, just select the configuration of your
choice from the list and press the Modify button
2
. The “Preset name” indicates
the label of the configuration under your focus. Any changes along the “AUDIO
INPUT”, “AUDIO OUTPUT” or “AUDIO MISC” menus would be applicable to the
selected preset as soon as the OK button is pressed. If instead the Cancel
button has been selected then the original preset configuration is kept.
Keep in mind that the edition of any preset configuration will not disturb the
current audio settings in operation.
Note: While the current audio configuration matches one of the stored Presets,
this will be indicated on the second line of the Preset Configuration panel as
“Current Preset: <…..>”. Any mismatch between the Preset Configurations and
the actual audio configuration forces the indication “Current Preset: <none>”.
VI.3
Loading a preset
Once a preset has been selected, its configuration can be invoked as active or
current by clicking on the “Load” button. The new configuration can be checked
by moving through the different audio configuration menus. Until the “Apply” or
“Ok” buttons are not pressed, the new audio configuration will not take effect.
2
This option is available from version 5.4.0 onwards
