Produal TRI-1R Series, Лист продукции, Страница: 13 / 28

Produal Oy
Copyright © 2020 Produal Oy - All rights reserved - 07/2020
PS 6001TRI - 13/28
Web-site: www.produal.com
Enquiries: T: +358 10 219 9100 E: info@produal.fi
Programming Schedule
(TRI-P-1R Only) The TRI-P-1R user interfaces have up to five programmable time switching times. Each switching
time can be configured to switch the
Time Channel network variable On/Off. The times can be set for
individual weekdays or can be switched 5+2 mode where the targets are set for WEEKDAYS or
WEEKENDS as a group.
The SCHEDULE OVERVIEW screen shows the current ON and OFF switching periods. By selecting
the day it is possible to adjust the switching times and On/Off setting.
NOTE: Switching from the 7 DAYS mode to 5+2 DAYS mode will set all weekday/weekend to the
group settings. When returning back to 7 DAYS mode the setting are required to be re-entered for
each day. A copy function is available to copy times and target temperatures from one day (or group)
to other day.
SETTING PROGRAM SCHEDULES
7 DAYS OR 5+2 DAYS
MODE SELECTION
7 Days
7 DAYS PROGRAMMING MODE
SELECT
DAY
Copy
Mon Tue Wed Thu
Fri
Sat Sun
0 12 24 18 6
Mon
Tue
Wed
Thu
Fri
Sat
Sun
Schedule Overview
VISUAL SCHEDULE
OVERVIEW
Time Target
Monday
Set Values
TOUCH TIME TO
CHANGE
SWITCHING
TIME
TOUCH TARGET TO
SELECT SWITCH-
ING TARGET
7
4
1
.
0
8 9
5 6 -
2 3
Esc
Enter Del
7
4
1
0
ENTER SELECTED PERIOD
SWITCHING TIME
:
Monday
Set Switching Time
07:40
0 12 24 18 6
Mon
On Off
On 06:30
Off 13:00
On 18:00
Off 22:30
Off 23:30
Language Selection The TRI user pages can be displayed in
different languages by selecting the
language from the System Configuration
pages. By enabling the Show Language
Swap parameter- the current language is
displayed at the bottom left corner of the
home screen. By clicking the icon it is
possible to change the displayed language.
18
.5
°C
Room
22
.7
°C
EN
CLICK TO SET LANGUAGE
ES CA BA
FR IT PL
EN FI SE
NOTE: If the Mode Icon has been
activated, the Language Selection icon is
no longer available.
Configuration Parameters
Sensor 1 Source
Hardware
Input Settings
Sensor 2 Source
Network
Sensor 3 Source
Hardware
Digital Input Mode
Close for ECO
ENTER MAINTENANCE CODE FOR
MAINTENANCE MODE CLICK TO ACCESS SETTINGS
GROUP CLICK TO CHANGE
SETTING
ACCESS
MORE
SETTINGS
6666
8 9
5 6 -
2 3
Esc
OK Del
Maintenance Code
Enter Code
7
4
1
0
Operating Modes
Parameter Groups
Display
Control Settings
Inputs
System
The TRI user interfaces are configured to operate in different modes via the configuration parameters
accessible through the maintenance mode.
To enter the maintenance mode click the COG WHEEL icon in the FURTHER SETTINGS SCREEN
and enter the maintenance mode password (default 6666).