ProCurve 3500yl Series, Руководство по управлению и настройке

Страница: 589 / 732

B-59
Monitoring and Analyzing Switch Operation
Traffic Mirroring
— Continued from Preceding Page—
< src | dest | both >:
Specifies how the MAC address is used to
filter and mirror packets in inbound and/or outbound
traffic on the interfaces on which the mirroring session is
applied:
src
: Mirrors all packets in inbound traffic that contain the
specified MAC address as source address.
dest
: Mirrors all packets in outbound traffic that contain the
specified MAC address as destination address.
Note: The MAC address of the switch is not supported as
either the source or destination MAC address used to select
mirrored traffic.
both
: Mirrors all packets in both inbound and outbound
traffic that contain the specified MAC address as either
source or destination address.
mirror < 1 - 4 | < name-str > :
Assigns the inbound and/or
outbound traffic filtered by the specified MAC address to a
previously configured mirroring session. The session is
identified by a number or (if configured) a name.
Depending on how many sessions are configured on the
switch, you can use the same command to configure a MAC
address as mirroring criteria in up to four sessions. To
identify a session, you can enter either its name or number;
for example:
mirror 1 2 3 traffsrc4
Refer to “Mirroring Source Limits” on page B-49 for the
restrictions on how many mirroring source criteria you
can configure in the same session.
< 1 - 4 >
: Specifies a mirroring session by number (1
to 4), for which the configured MAC address is used
to select and mirror inbound and/or outbound traffic.
[name < name-str >]:
(Optional) Specifies a mirroring
session by name (alphanumeric string), for which the
configured MAC address is used to select and mirror
inbound and/or outbound traffic. For a remote
mirroring session, you must configure the same
session name on both the source and destination
switch.
3500-5400-6200-8200-MCG-Jan08-K_13_01.book Page 59 Monday, January 28, 2008 10:04 AM