ProCurve 3500yl Series, Руководство по управлению и настройке

Страница: 269 / 732

11-19
Power Over Ethernet (PoE) Operation
Configuring PoE Operation
For example, you can enter this command to enable LLDP detection:
ProCurve(config)# int A7 poe-lldp-detect enabled
or in interface context:
ProCurve(eth-A7)# poe-lldp-detect enabled
N o t e
Detecting PoE information via LLDP only affects power delivery; it does not
affect normal Ethernet connectivity.
You can view the settings by entering the show power-over-ethernet brief
command:
Figure 11-1. Example of Port with LLDP Configuration Information Obtained from the Device
Syntax
:
int < port-list > poe-lldp-detect [enabled | disabled]
Enables or disables port(s) for allocating PoE power based on
the link-partner’s capabilities via LLDP. By default, PoE
information detected through LLDP is ignored.
Default: Disabled
ProCurve(config)# show power-over-ethernet brief
Status and Counters - Port Power Status
PoE | Power LLDP Power Alloc PoE Configured Detection Power
Port | Enable Detect Priority By Val Type Status Class
----- + ------- -------- --------- ----- ---- ----------- ----------- ------
A1 | Yes enabled low usage 5 Phone-1 Delivering 0
A2 | Yes disabled low usage 17 Searching 1
A3 | Yes disabled low usage 17 Searching 0
A4 | Yes disabled low usage 17 Searching 2
A5 | Yes disabled low usage 17 Searching 0
A6 | Yes disabled low value 17 Searching 0
A7 | Yes enabled low value 5 Phone-2 Delivering 0
A8 | Yes disabled low value 17 Searching 0
3500-5400-6200-8200-MCG-Jan08-K_13_01.book Page 19 Monday, January 28, 2008 10:04 AM