Process Technology Lufran LUF Series, Руководство пользователя

Страница: 10 / 63

9
M-43-25 LUF-Series Lufran Manual
Revision - Date 03-01-04-18 Standard outlet, Standard Interface
Engineering Information (Continued):
Model Number (Continued):
LUF-130-3LL6-SK
    

Heater Inlet, Outlet Plumbing Connections.
The heater inlet and outlet plumbing connections are usually the same. However, it is possible to have
different plumbing connections for the inlet and outlet. The characters to describe the plumbing
connections have the same designation for both the inlet and outlet connections. Please refer to the table
below to see the specific plumbing connections provided with the heater:
Heater Model
Number
Plumbing Connection Type Plumbing Connection Size: mm (in)
A Flared Tube Fitting 13mm (1/2-inch)
B
Flared Tube Fitting 19mm (3/4-inch)
C
Flared Tube Fitting 25mm (1-inch)
D Union manifold Connector 32mm (1 ¼-inch)
E Flange 19mm (3/4-inch)
F
NPT Pipe Threads, Female 13mm (1/2-inch)
G NPT Pipe Threads, Female 19mm (3/4-inch)
H NPT Pipe Threads, Female 25mm (1-inch)
I
NPT Pipe Threads, Male 13mm (1/2-inch)
J
NPT Pipe Threads, Male 19mm (3/4-inch)
K NPT Pipe Threads, Male 25mm (1-inch)
L Butt Fusion Union 25mm (1-inch)
M
BCF Union 32mm (1 ¼-inch)
N Socket Fusion Union 32mm (1 ¼-inch)
P Pillar Tube Fitting 13mm (1/2-inch)
Q Pillar Tube Fitting 19mm (3/4-inch)
R
Pillar Tube Fitting 25mm (1-inch)
U Socket Fusion Union (Standard) 25mm (1-inch)

Flow Meter Device. The ultrasonic flow meter device is part of the DAC temperature control system.
The flow meter is selected based upon total wattage of the heater and operating flow rate range. This
device does not require routine maintenance or re-calibration.
Heater Model
Number
Device
Brand
Water Flow
Range
Process Technology
Part Number
0-4
5 Thornton 2-20 LPM 8136
6 Thornton 10-70 LPM 8137
7
Honda 0.5-20 LPM 9238
8 Honda 1-50 LPM 09-6820
9 Thronton 15-150 LPM 9964