Proceq Zehntner ZRM 6013+, Инструкция по эксплуатации

Страница: 24 / 76

Operate
ZRM 6013+
Instruction manual version 1.1
page 24 last update: 30.07.2014
9. Measure
9.1
Measure mode
9.1.1 Taking single measurements
By pressing the measuring button the reading is
started. During the measuring period which is about
2-
3 seconds, you will see „-„ on the top line and the
symbol on the top left side.
For the correct positioning of the
ZRM 6013+ on the
road marking please refer to chapter 9.2
„Common
information for a proper measuring procedure
” on
page 27 and chapter 9.3
„Special instructions” on
page 27.
After a successful reading, the measurement values
will be shown on the top.
If you take further measurements, the last
measurement value is always shown in the second
line on the top.
For editing or deleting such a measurement please
refer to chapter 9.1.4
„
Edit, delete and store
measurements
” on page 26.
For changing the settings of the measure mode, please refer to chapter 14.3
„Measure mode“
as from page 47.
9.1.2 Taking average measurements
For activating average reading press on the
touchscreen the symbol . If the symbol is
shown, the average reading is activated.
By pressing the measuring button the reading is
started. During the measuring period which is about
2-
3 seconds, you will see „-„ on the top line and the
symbol on the top left side.
For the correct positioning please refer to chapter 9.3
"Special instructions
” on page 27 and chapter 9.4
“Obtain exact measuring values” on page 27.