6
© 2014 Proceq SA
3.2 Connect Probes
The Zonotip is available with two different transducers: The standard 4.0 MHz dual-element trans-
ducer is meant for most measurements (see figure 5). It requires two cables, one for the outgoing
signal, one for the incoming. The optional 2.5 MHz single-element integrated transducer is smaller
and requires only one cable (see figure 6). This makes it more convenient to use in smaller areas
or in areas that are harder to access. The 2.5 MHz is included when purchasing the Zonotip
+
unit.
It is also available separately.
Figure 5: 4.0 MHz transducer (D1771)
Figure 6: 2.5 MHz transducer (S3567)
3.3 Overview Keypad
ON / OFF
Turn the instrument “on” or “off”.
Functional Key
Carry out various actions depending on
the settings. The respective operation is
displayed above each of the keys.
Measurement Mode
/ Setup Screen
Switch between the measurement modes
and the setup screen.
Enter
Confirm a selection.
Left / Right
Navigate through the menu.
Up / Down
Navigate through the menu.
Plus / Minus
Select and change active parameters.
